Installing Batteries; Using The Ac Adapter - Walgreens PREMIUM ARM Manual De Instrucciones

INSTALLING BATTERIES

1. Press foward on latch and lift
the battery cover to open the
battery compartment.
2. Install or replace 4 "AA " sized
alkaline batteries in the battery
compartment according to
the indications inside the
compartment.
3. Close the battery cover by
pushing in the top end of the
battery door.
Replace the batteries if:
• The weak battery symbol appears.
• When any button is pressed and nothing is displayed on
the screen.
Note:
• If the batteries are removed or replaced, the date and time will
need to be re-set either manually or automatically using your
Bluetooth mobile device.
• Replace all batteries at one time (as simultaneous set). Use
only 1.5V "AA" alkaline batteries.
• When the batteries are removed, the measurement values are
retained.
• Remove batteries when unit is not in use for extended periods of
time.
• Clean contacts on battery and in battery compartment with a soft
dry cloth each time you install batteries.
• Batteries are hazardous waste. Do not dispose of them
together with the household garbage.
Battery
Cover
11

USING THE AC ADAPTER

1. Connect the AC adapter with the AC adapter jack as shown
below.
2. Please use only the AC adapter included with this monitor.
Note:
• When the AC adapter is your main power supply, make sure
the adapter plug can be easily removed from the unit.
• Please unload the batteries when operating with an AC
adapter for an extended period of time. Leaving the batteries
in the compartment for a long time may cause leakage,
which may lead to damage to the unit.
• No batteries are needed when operating with an AC
adapter.
• Date and time will need to be reset if AC adapter is
unplugged and unit is without batteries.
ON OFF ON OFF
Triple Check Rest Assure
Connect AC
adapter here
AC Adapter
Input: 100-240V~0.18A-0.20A 50/60Hz
Output: 6V DC 1A 6W Max
12