Publicidad
Idiomas disponibles
Idiomas disponibles
Usin9 the Controls - 3 Speed Select Models
Select Water Level
Determine
the selected setting based on clothes load
size. Selection should provide sufficient
water to permit
clothes to circulate
freely during agitation.
It may become necessary, due to bulky fabrics, to
adjust the water level after agitation
begins. To adjust
the water level, turn the control to reset and then back
to the desired setting.
Mini
1//4 Full
Small
1//4- 1/3
Medium
1/3-
1/2
Large
1/2 - 2/3
Super
3//4- Full
I Note:
Items must circulate
for best results.
freely
Select Wash/Rinse Temperature
Your washer gives you a choice of hot, warm or cold
water for washing
and cold or warm water (select
models) for rinsing. Use the chart below as a guide.
White and heavily soiled, color-fast
Hot/Cold
items.
Warm/Warm
Moderately
soiled, colored items.
(select models)
Warm/Cold
Moderately
soiled, colored items;
most wrinkle-free
items.
Cold/Cold
Brightly colored, lightly soiled
items; washable woolens.
Note:
In wash water temperatures
below 60° E
detergents
do not dissolve well or clean well. Care
labels define cold water as up to 85° E
Wat;_f
L_I
I
Automatic
Temperature
Control (A.T.C.)
(select
models)
provides the optimal wash water
temperatures
for cleaning. To save energy, the
Automatic
Temperature
Control will regulate wash
water temperatures
by mixing hot and cold water to
reach the proper water temperature.
ATC Hot/Cold,
ATC Warm/Cold
ATC WarndWann
(select models)
ATC Cold/Cold
These settings feature
Automatic
Temperature
Control:
Saves energy by adding cold water
to the hot water from your water
heater. Provides optimum
cleaning
at lower temperatures.
May add hot water to the incoming
cold water as the washer fills. This
assures that the water will be warm
enough to properly activate
detergent.
Publicidad
