Publicidad
Idiomas disponibles
Idiomas disponibles
Select Cycle
To select a cycle, push the control dial in (off position)
and turn it to the right (clockwise)
until the pointer is at
the soil level needed for the wash load.
Important:
For optimum
fabric care, the appropriate
wash and spin speed for the load type must be
selected using the wash/spin
speed knob.
Regular Cycle
This cycle provides up to 16 minutes of agitation.
Select the Regular
Wash/Spin
Speed setting.
Wrinkle
Control
This cycle is designed
for sturdy fabrics needing a
slower spin speed to reduce wrinkling,
such as dress
shirts and dress pants. Select the Wrinkle
Control
Wash/Spin
Speed setting.
Delicates
Cycle
Delicates
is designed for items requiring delicate wash
action. Select the Delicates
Wash/Spin
Speed
setting.
When washing
delicate fabrics labeled hand wash,
select the Handwash
Wash/Spin
Speed setting.
This
setting provides intermittent
slow agitation
and soak
with a slow spin.
Soak Only (select models)
Provides 4 minutes of agitation, then soak. Avoid
extended
soaking
- soak for 30 minutes
or less.
The control dial must be manually advanced to a spin
setting to spin and drain the water.
Select Options
(if desired)
Extra Rinse
When the knob is in the On position, an additional
rinse at the end of the Regular, Wrinkle Control and
Delicates cycles is provided to more completely
remove laundry additives, suds, perfumes, etc.
End of Cycle Signal (select models)
The end of cycle signal will sound once the cycle is
completed. The end of cycle signal can be canceled
by
setting the switch to Off.
Pull Control Dial Out to Start
You may stop the washer at any time by simply
pushing the control dial in. Therefore it is possible to
obtain a non-agitated
soak or to shorten, skip or
repeat any part of a cycle. The control dial must be
_ushed in (off position) when you change the setting.
Note:
Do not attempt to turn the control dial
counterclockwise.
Damage to the timer will result.
I
Publicidad
