Publicidad
Idiomas disponibles
Idiomas disponibles
ASSEIVlB LY/ADJ USTM ENT
SET=UP
Z_ WARNING: Always unplug sander from
power supply before any of the following
operations.
ATTACHING
HOOK
AND LOOP
SANDING DISCS (FIGURE B)
Your sander is designed to use 5" (127mm)
sanding discs with the 8 hole dust
extraction pattern. For best results, use
BLACK+DECKER
accessories.
• To attach the sanding disc (5), carefully
center it over the sanding pad (2) ensuring
the holes in the disc align with the holes in
the pad and press the disc firmly in place.
• The hook and loop fastening system sanding
disc can be easily removed by simply pulling
it off. It can be reused as desired.
DUST COLLECTION
(FIGURE D)
Z_WARNiNG: Collected sanding dust from
sanding surface coatings (polyurethane,
linseed oil, etc.) can self-ignite in sander
dust bag or elsewhere and cause fire. To
reduce risk, empty bag frequently and
strictly follow sander manual and coating
manufacturer's
instructions.
Your sander comes equipped with a cloth
canister (4) to collect the dust generated
while sanding.
• To attach the canister to the sander, line
up the grooves (6) in the canister (4) with
the hubs (7) on the dust port (3). Ensure
the longer side (8) of the canister opening
is on the top side of the port.
• Slide the canister onto the dust port and
turn the canister clockwise to lock it in
place as shown in the insert of Figure D.
• To remove, turn the canister
counterclockwise and slide the canister off.
• To empty the canister, remove it from the
dust port and dump the sanding debris
into an appropriate trash receptacle.
OPERATING
iNSTRUCTiONS
z_WARNING:
To reduce the risk of serious
personal injury, read, understand and follow
all important safety warnings and
instructions prior to using this tool.
SWITCH
To turn the tool ON, hold it as shown in
Figure C and push the portion of the switch
(1) marked 'T'. To turn the toot off, push the
portion of the switch marked "O"
OPERATION
Grasp the sander and turn it ON. Move it in
long, sweeping strokes along the surface,
letting it do the work. Pushing down on the
toot while sanding actually slows the removal
rate and produces an inferior quality finish.
Check your work often. This sander is
capable of removing material rapidly.
MAINTENANCE
Use only mild soap and damp cloth to ctean
the tool. Never let any liquid get inside the
tool; never immerse any part of the tool into
a liquid.
IMPORTANT:
To assure product SAFETY
and RELIABILITY, repairs, maintenance
and adjustment should be performed by
authorized service centers or other qualified
service organizations, always using identical
replacement parts.
ACCESSORIES
ZLWARNING:
The use of any accessory
not recommended for use with this tool
could be hazardous.
Recommended accessories for use with
your tool are available from your local dealer
or authorized service center. If you need
assistance regarding accessories, please
call: 1-800-544-6986.
SERVICE
iNFORMATiON
All BLACK+DECKER Service Centers are
staffed with trained personnel to provide
customers with efficient and reliable power
tool service. Whether you need technical
advice, repair, or genuine factory replacement
parts, contact the BLACK+DECKER location
Publicidad
