Descargar Imprimir esta página

Black and Decker BDERO100 Manual De Instrucciones página 6

Publicidad

Idiomas disponibles

Idiomas disponibles

nearest you. T ofind your l ocal service
location, call: 1 -800-544-6988
orvisit
www.blackanddecker.com
LIMITED TWO-YEAR
HOME USE
WARRANTY
Black & Decker (U.S.) Inc. warrants this
product for two years against any defects
tn material or workmanship.
The defective
product will be replaced or repaired at no
charge in either of two ways. The first,
which will result in exchanges only, is to
return the product to the retailer from whom
it was purchased (provided that the store is
a participating retailer). Returns should be
made within the time period of the retailer's
policy for exchanges (usually 30 to 90 days
after the sale). Proof of purchase may be
required. Please check with the retailer for
their specific return policy regarding returns
that are beyond the time set for exchanges.
The second option is to take or send the
product (prepaid) to a BLACK+DECKER
owned or authorized Service Center
for repair or replacement at our option.
Proof of purchase may be required.This
warranty does not apply to accessories.
This warranty gives you specific legal rights
and you may have other rights which vary
from state to state or province to province.
Should you have any questions, contact the
manager of your nearest BLACK+DECKER
Service Center. This product is not intended
for commercial use.
FREE WARNING LABEL
REPLACEMENT:
If your warning labels
become illegible or are missing, call 1=800=
544-6986 for a free replacement.
LATIN AMERICA: This warranty does not
apply to products sold in Latin America. For
products sold in Latin America, check country
specific warranty information contained in the
packaging, call the local company or see the
website for warranty information.
Problem
Possible Cause
• Unit will not start.
• Cord not plugged in.
• Circuit fuse is blown.
• Dust is not
being collected.
• Circuit breaker is tripped.
• Cord or switch is damaged.
• Sandpaper holes do not align.
• Dust canister is full.
TROUBLESHOOTING
Possible Solution
• Plug tool into a working outlet.
• Replace circuit fuse.
(If the product repeatedly causes
the circuit fuse to blow, discontinue
use immediately and have it
serviced at a BLACK+DECKER service
center or authorized servicer.)
• Reset circuit breaker. (If the
product repeatedly causes the
circuit breaker to trip, discontinue
use immediately and have it
serviced at a BLACK+DECKER service
center or authorized servicer.)
• Have cord or switch replaced at
BLACK+DECKER
Service Center or
Authorized Servicer.
• Use Mousd R> s andpaper with the
appropriate hole configuration.
• Separate dust canister and gently
shake or tap to empty.
For assistance with your product, visit our website www.blackanddecker.com
for the
location of the service center nearest you or call the BLACK+DECKER
help line at
1=800=544-6986.
Imported by:
Black & Decker (U.S.) Inc.,
701 E. Joppa Rd.
Towson, MD 21286 U.S.A.

Publicidad

loading