Publicidad
Idiomas disponibles
Idiomas disponibles
M8X222 / M8X232 / M8X242 / M8X252 / M8X272
STEP 1: PREPARING THE OUTER FRAME
DO NOT REMOVE PROTECTIVE MATERIAL
DO NOT REMOVE STRAPPING TAPE
L L
W A
USE LABELS ON SIDE RAILS
STEP 2: ATTACHING THE LEGS
ASHLEY®
E
A
A B
C
TIGHTEN ALL LEG SEGMENTS AND END PLUG FIRMLY
All Rights Reserved.
Lay the Crossbars (E) and Side Rails (A, B) on the
ground, as shown in the picture.
IMPORTANT:
▪
Ensure the Crossbars are parallel and roughly
5 feet (150 cm) apart.
▪
Use the labels on the Side Rails to ensure they
are oriented correctly.
▪
Use the Crossbars to determine the position
of the Side Rails. The Side Rails should be the
width of the Crossbar apart.
E
1. Position the first Leg (C) below
the Side Rail (A/B) as shown in
the picture.
2. Turn the Leg to screw it into the
Side Rail. It should be hand tight.
3. Repeat Steps 1 and 2 to Screw
in the other 3 Legs.
Mar.2023
INSIDE OF FRAME
B
Page 12 Of 87
Publicidad
