Publicidad
Idiomas disponibles
Idiomas disponibles
M8X222 / M8X232 / M8X242 / M8X252 / M8X272
STEP 3: CONNECTING THE BARS
CAUTION
Risk of Serious injury or death through crushing
The Side Rails are not secured while they are standing alone. If they fall over, this may lead to minor or moderate
injury through crushing.
▪ Do not attempt to stand the Side Rails upright before they are connected to the Crossbars
▪ Be careful not to knock over the Side Rails
▪ Ensure that you are wearing suitable footwear while assembling the Bed Frame
1.
Lift the first Crossbar
place one end of it into a slot on
the Side Rail (Right) (A).
Ensure the Thread on the Side
Rail (the metal part facing
upwards) passes through the
hole at the end of the Crossbar.
2. Place a Crossbar Knob (D) onto
the thread connecting the Side
Rail and the Crossbar. Turn the
Knob clockwise until it is hand
tight.
3. Repeat steps 1 and 2 for the
second Crossbar.
x2
D
ASHLEY®
(E) and
D
A
E
A
All Rights Reserved.
REMOVE STRAPPING TAPE
REMOVE PROTECTIVE MATERIAL
TOP
SIDE
E
D
Mar.2023
E
TOP
SIDE
Page 13 Of 87
Publicidad
