Publicidad
Idiomas disponibles
Idiomas disponibles
M8X222 / M8X232 / M8X242 / M8X252 / M8X272
STEP 7: MOUNTING THE BASE PLATFORM
STEP 8: MOUNTING THE BASE PLATFORM
x2
S
ASHLEY®
A D
H E
K
A D
W
H E
A
All Rights Reserved.
1. Lay the Base Platform (S) upside
S
down across the Bed Frame. The
Net should face upwards.
2. Lay the Control Box (K) inside
the Net on the Base Platform.
1. Turn over the Base Platform (S)
and lay it flat across the center
W
of the Bed Frame. The Net should
face downwards.
2. Ensure that the Platform is correctly
positioned. There should be 2
Mounting Holes on each Side Rail
(A, B) either side of the Platform.
3. Use 2 Platform Screws (W) to fix
the Platform by hand. Turn each
screw until it is hand-tight.
B
Mar.2023
Page 17 Of 87
Publicidad
