Publicidad
Idiomas disponibles
Idiomas disponibles
M8X222 / M8X232 / M8X242 / M8X252 / M8X272
STEP 11: MOUNTING THE INNER PLATFORMS
USE LABELS ON SIDE RAILS AND PLATFORMS
x4
IMPORTANT:
▪
Use the labels on the Side Rails (A, B) to ensure the Platforms are at the right end.
▪
Ensure the Platforms are oriented correctly. The curved edges should face outwards and the Brackets for
the Retainer Bar should face downwards.
STEP 12: CONNECTING THE POWER CABLES
1
2
J
3
L
ASHLEY®
A D
H E
U
G
F
L
H
All Rights Reserved.
1. Lay the Foot Platforms (U)
in position on the Side Rails.
2.
Use the final 4 Platform Screws
(W) to attach the Head and Foot
Platforms to the Side Rails (A,
B).
W
W
O T
F O
1. Connect the red marked
Connecting Cord (F) and DC
Power Cord (G) with red marked
connectors on Y Cord (J).
2. Connect green marked connector
of Y Cord (J) with green marked
connector on cable from Power
J
Converter.
3. Connect the main AC Power Cord
(H) to the Power Converter and
then to the main.
4. Lay the main power cable along
the wall behind the Bed Frame
to minimize the risk of tripping.
Mar.2023
Page 19 Of 87
Publicidad
