Publicidad
Idiomas disponibles
Idiomas disponibles
M8X222 / M8X232 / M8X242 / M8X252 / M8X272
STEP 9: MOUNTING THE INNER PLATFORMS
x4
STEP 10: ATTACHING THE RETAINER BAR
ASHLEY®
A D
H E
T
T
A
U
All Rights Reserved.
1. Ensure that the Platform (T)
are correctly positioned. There
should be 2 Mounting Holes on
W
each Side Rail (A, B) either side
of the Platform. Use 2 Platform
Screws (W) to fix the Platform
by hand. Turn each screw until
it is hand-tight.
W
2. Repeat Step 1 to Screw in the
other platform (T).
B
1. Move the Retainer Bar (Y) into
position. The two ends of the
Bar should be inside the Brackets
at the end of the Foot Platform
(U).
2. Press the Retainer Bar (Y) firmly
towards the Bed Frame to click
it into place.
Mar.2023
Y
Page 18 Of 87
Publicidad
