Publicidad
Idiomas disponibles
Idiomas disponibles
22
USING
YOUR
WASHING
MACHINE
USING YOUR WASHING
MACHINE
Basic
operafion
8
Load the laundry into the washing machine and close the door.
Press the Power button.
- The lights around the cycle selector knob will illuminate and a chime will sound.
4
Turn the cycle selector knob to the desired cycle.
- The optimum default cycle settings are automatically set according to the wash cycle. See
page 23, Cycle guide, for more detail on the default settings for each cycle.
See page 24, Main cycle, for details on the wash cycles.
- To change the settings, press the cycle modifier buttons and select the desired settings. See
page 25, Modifying settings before the cycle, for more details on modifying cycle settings.
Skip to step 4 to use the default settings without
modifying them.
Add the proper amount of detergent and additions (bleach, softener) into the detergent dispenser
drawer.
See page 20, Using detergent/fabric
softener, for more details on using detergent.
Press the Start/Pause button.
- The washing machine will start.
When the melody plays, the wash cycle is finished.
- When the washing cycle is finished, the door will unlock. Open the door and remove the
laundry immediately.
Make sure to check around the door seal when taking out the finished load. Small items may
be caught in the door seal.
/o T_o rWcAeRNINere
electr, cshock
or,nur
to
ersons read
operating this appliance.'
"
'
J
Y
p
'
the IMPORTANT SAFETY INSTRUCTIONS before
,
f@NOTE
The front-load washing machine rotates the laundry in a way that allows it to use less water while still fully saturating your
clothing. It is normal to not be able to see water during the wash cycle.
If the temperature
or the water level inside the machine is too high, the door locks and cannot be opened. To open the door
while washing, use the Rinse + Spin feature.
Publicidad
