Publicidad
Idiomas disponibles
Idiomas disponibles
40
SPECIFICATIONS
Problem
"
Possible Causes
i
Solutions
Wrinkling
. Did you remove the load immediately after it
. Remove the load immediately after it finishes.
finished?
. Do not overload the tub.
Power is not turned on
The door does not open
when the cycle pauses or
finishes
The wash cycle time is
longer than usual
. Did you overload the tub?
. Did you reverse the hot and cold water inlets?
Is the power cord plugged in properly?
. Has a house fuse blown, a circuit breaker
tripped, or a power outage occurred?
Is the temperature
in the tub too high?
. Is the water level in the water high?
. Is the washing machine overloaded? Are other .
options added to the wash cycle?
. Has the incorrect detergent been used?
. Did you clean the tub periodically?
It is musty or moldy in the
tub
Hot water rinse can cause garments to
wrinkle. Check the inlet hose connections.
Make sure that the plug is secured in a
grounded 3-prong, 120 V (60 Hz) outlet.
Reset the circuit breaker or replace the fuse.
Do not increase the fuse capacity. If the
problem is a circuit overload, have it corrected
by a qualified electrician.
The washing machine has a safety lock built
into the door to prevent burning. Leave the
door closed and wait until the door lock icon
disappears from the display.
Allow the washer to complete the
programmed
cycle, or Press the Spin Speed
button.
This is normal. The washing machine
automatically adjusts the cycle time for the
amount of laundry, water pressure, water
temperature,
and other operating conditions.
Use only HE (High-Efficiency) detergent
recommended
for a front-loading washing
machine.
See page 33, clean the inside and outside of
the washing machine periodically.
SPECIFICATIONS
Description
Front-Loading Washer
Electrical requirements
t20 VAC @ 60 Hz.
Max. water pressure
t4.5 - 1I6 psi (100 - 800 kPa)
Dimensions
73.7cm (W) X 81.4cm (D) X 103.5cm (H), 146cm (D with door open)
29" (W) X 32" (D) X 40 sA" (H), 571/2" (D with door open)
Net weight
2251b (102kg)
Max. spin speed
1,300RPM
Publicidad
