Publicidad
Idiomas disponibles
Idiomas disponibles
10. Maintenance
Only use specified spare parts for maintenance
purposes. The manufacturer cannot accept any
responsibility for accidents occurring following
repairs carried out outside its after-sales
department or approved maintenance network.
Changing the battery
For safety reasons, never open the detector
before first disconnecting it from any source of
electricity.
Remove the captive screw fastening the
battery compartment and open the battery
compartment.
Replace the used 9 V battery.
Close the battery compartment and retighten
the screw on the back of the casing.
Storage
If the detector is not used for a period of more
than 60 days, remove the battery and store it
separately.
Cleaning
The instrument must be disconnected from any
source of electricity.
Clean the unit with a cloth slightly moistened with
soapy water. Wipe off with a damp cloth.
Then dry quickly with a cloth or pulsed air.
Metrological verification
It is essential that all measuring instruments are
regularly calibrated.
For checking and calibration of your instrument,
please contact our accredited laboratories (list
on request) or the Chauvin Arnoux subsidiary
or Agent in your country.
Repairs under or out of guarantee
Please return the product to your distributor.
17
Publicidad
