Descargar Imprimir esta página

Sage Barista Express BES876 Guía Rápida página 14

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 130
NOTE
• This feature is only available on 'Auto' mode.
• This feature may require 2 to 3 top up cycles to
reach an ideal dose.
• The set auto grind time will not be affected by
this feature.
• Machine will not start a top up with an over dose
or ideal level. Remove the portafilter and trim the
excess with the razor.
Over Dose (Trimming the Dose)
the
Precision dose trimming tool
The Razor
precision dose trimming tool
allows you to trim the puck to the right level
for a consistent extraction.
Insert the Razor
into the coffee basket until
the shoulders of the tool rest on the rim of the
filter basket. The blade of the dosing tool should
penetrate the surface of the tamped coffee.
Rotate the Razor
dosing tool back and forth
while holding the portafilter on an angle over
the knock box to trim off excess coffee.
14
Razor
Manual Dosing
AUTO
MANUAL DOSE
Press the manual dose button to switch to
manual dose mode. The light around the Manual
Dose Dial and the Manual light will illuminate
when in manual mode.
Select the dose amount by turning the dial
clockwise for more or counter clockwise for
less grind time.
Grinder Purge
It is recommended to purge the retained grinds
left in the burrs or chute prior to making the first
coffee of the day. Old grinds may affect the
in-cup quality and coffee taste. Purging will
ensure only fresh coffee makes it into your cup.
To purge, press and hold the 'Dose' button. The
grind will start after 0.5 seconds, and it will stop
once the 'Dose' button is released.
In auto mode, after doing a purge it is required
to remove the portafilter, discard the grind from
the basket and re-insert the portafilter into the
grinding cradle to return the machine to its
standby mode.
MANUAL

Publicidad

loading

Este manual también es adecuado para:

Barista express ses876