Publicidad
Idiomas disponibles
Idiomas disponibles
8. Remove/Adjust the Drawer
Latch
Adjust the Level
To adjust the position of the drawer, rotate the adjustment wheel underneath the front corners to the left or right as
needed.
Removal
Fully extend the drawer.
From underneath, press the release latches toward the sides of the drawer.
Lift the front of the drawer to disengage from the rails.
Reinstallation
Fully extend both rails.
Rest the back of the drawer onto the rails and align the rail hooks with the drawer holes.
Rotate the front of the drawer down onto the rails, engaging the latches with the rails.
Push the drawer closed to fully snap the latches into the rails and insert the rail hooks into the drawer holes.
Lightly lift the front of the drawer to verify that the drawer is fully engaged with both rails. If not engaged, repeat the
"Reinstallation" procedure.
Kohler Co.
Adjustment Wheel
Hole
Hook
11
Rail
Hole
1551655-2-A
Publicidad
