Publicidad
Idiomas disponibles
Idiomas disponibles
2. Install the Legs
IMPORTANT! Perform this procedure with two people.
Lay the vanity on its back on a flat, padded surface.
Attach the legs using the provided hex screws, lock washers, and washers.
Securely tighten the screws using the provided hex wrench.
48", 60", and 72" Vanities: Proceed to the "Install the Center Leg (48", 60", and 72" Vanities Only)" section.
All Other Vanities: Carefully stand the vanity upright. Do not slide or side-load the legs.
Kohler Co.
5
1551655-2-A
Publicidad
