MHZ SOLIX Instrucciones De Manejo página 36

Solix external roller blind
Installation instructions
Important information for the installer and user
DE
FR
NL
1. Unpack blind unit and check for any damage.
Do not install any damaged unit. Consult the specialist retailer first.
As climbing aids use only ladders that have a sufficiently high load-bearing capacity and are undamaged.
They must be steady and provide adequate grip.
2. Fully open window
EN
3. Push Solix from inside into the window frame.
First 1 place in position at the top and then 2 push in at the bottom.
n the version with an insect screen handles are fitted for this.
Note: If the Solix frame is too small and there is insufficient unit surface area available around it against the window
frame (at least 4 mm on each side), the Solix may not be installed. There is a danger of the Solix
falling out and causing serious injuries or damage.
ES
36
IT
1
2
Required tools:
Size 1
Edition 04.2022
Subject to technical changes I