MHZ SOLIX Instrucciones De Manejo página 37

Important information for the installer and user
3
5
4.
The frame is fixed within the window frame via AR fixings.
Start with the two bottom ones and then tighten the top two AR fixings.
Press
3 AR fixing shown red by the
4 plastic grip (shown blue) up /
out into the corners and hold there
5 Tighten screws so they are hand-tight
Note: Make sure that the 3 AR fixing has ade uate hold.
5. Close the window.
Note: If the window sash cannot be closed or can be closed only by force and it makes unusual noises, the Solix must be
taken out again and the specialist retailer contacted.
6. Reading the operating instructions
rior to first use, it is imperative that you pay attention to the guidance in the operating instructions.
7. Taking down the Solix external roller blind
The external roller blind is taken down in reverse order to its installation.
First the external roller blind is retracted. Then, by undoing the four screws and pushing back the AR fixings, the frame, complete
with the entire unit, can be taken out to the rear.
Edition 04.2022
Subject to technical changes I
3
4

3
Installation instructions


3
3
Solix external roller blind
DE
FR
NL
EN
ES
7
IT