MSW Motor Technics MSW-PLT-W24 Manual De Instrucciones página 112

8) Click the Device you found, and confirm to add, then you can control the stove by
mobile phone.
9. Error and solution
Error code Error name
E1
Room / water
temperature sensor
failure
E2
Smoke sensor failure
E3
Ignition failure / fire
failure
EN
Possible error
Bad wires connection with
1.
control board
Sensor broken
2.
Bad wires connection with
1.
control board
Sensor broken
2.
The hopper is empty
1.
The feeder be jammed by
2.
the pellets
Pellet feeding is too much
3.
/ less for current power
level
Solution
Check the wire connection with
1.
control board
Replace a new sensor
2.
1. Check the wire connection with
control board 2. Replace a new
sensor
Reload the pellets
1.
Check and clean the feeding
2.
system
Adjust the Feeding speed
3.