Publicidad
u) It is forbidden to start the product with the door open or with broken glass. If the
ignition system is damaged, do not force ignition with flammable materials.
v) Before installation, contact your local building authority (such as city building
department, fire department, fire department, office, etc.) to determine whether a
permit and/or inspection is required.
w) Installation, electrical connection, inspections, maintenance and repairs are activities
that must only be performed by qualified personnel with specialist knowledge of the
product.
x) Walls near the product must not be made of flammable materials.
y) Minimum distances from walls and other objects should be taken into account to
ensure safe use.
z)
Check that the floor on which the product is to be installed is properly level.
aa) The stove must be assembled by at least two people.
bb) Use only recommended wood pellets in your pellet stove.
cc) Never use liquid fuels to light a pellet stove or re-ignite embers.
dd) Make sure that the area where the stove is installed is adequately ventilated when
the stove is lit.
ee) Do not remove the protective grid from the pellet tank.
ff) Any accumulation of unused pellets in the burner resulting from repeated failed
ignitions must be removed before attempting to light the stove again.
gg) The operation of the stove may cause the surfaces, handles, chimney pipe and glass
to become very hot. When the stove is operating, touch these parts only when
wearing protective clothing, otherwise use appropriate tools.
hh) Do not place items that are not heat-resistant on the stove or in the recommended
minimum safety area.
ii) Do not open the door while the stove is in operation and do not operate the stove if
the glass is broken.
ATTENTION! Despite the safe design of the device and its protective features, and
despite the use of additional elements protecting the operator, there is still a
slight risk of accident or injury when using the device. Stay alert and use common
sense when using the device.
NOTE: This product is not suitable for use in mobile devices such as vehicles,
caravans, tents, etc.
3. Use guidelines
The device is designed to generate heat for heating buildings and water by burning pellets. It
is suitable for permanent installation in buildings, however, it is not suitable for use in
prefabricated houses.
The user is liable for any damage resulting from unintended use of the device.
4. Installation instructions
Ensure that the installation of your product conforms to all the indications given below.
EN
Publicidad
