Worx WG300 Manual Del Usuario página 16

protrude (b) must befitted into thebar h ole.
(See f ig.S)
SHARPENING SAW CHAIN
_ ARN|NG: Unplug chain saw from
power so.rce before servicing.
Severe inju_ or death couJd occur from
eJectPica| shock or body contact with
mo_ng chain.
_ ARN|NG: Cutting edges on chain
are sharp. Use protective gJoves
when handJin9 chain.
Keep chain sharp.Your saw will cut faster and
more safely. A dull chain will cause undue
sprocket, guide bar, chain, and motor wear. Jf
you must force chain into wood and cutting
creates only sawdust with few large chips,
chain is dull.