Publicidad
Idiomas disponibles
Idiomas disponibles
When you connect external devices including a
video cassette recorder and home audio system,
you can easily switch the input mode with the
remote control.
NPUT
,':
i_h
SELECT
i;i!iii J,¸ !!!ii i
1 Switch the input mode.
• When you press [INPUT SELECT]
or [CH
A/T] on the remote control, the input mode will
be switched as below.
TV/DTV
channel
Video1
Video2
!
Component|
4
Component2
HDMI
• To use the VIDEO1 or S-VIDEO1 INPUT jack on
the TV, select "Video1".
• To use the VIDEO2 or S-VIDEO2 INPUT jack on
the TV, select "Video2".
. To use the COMPONENT1
INPUT jacks on the
TV, select "Component1 ".
. To use the COMPONENT2
INPUT jacks on the
TV, select "Component2".
. To use the HDMI INPUT jack on the TV,
select "HDMI".
• When you press [INFO], the current external
input mode, the type of resolutions for video
signal, TV aspect ratio CC and TV rating will be
displayed at the top-right of the screen.
1) When using VIDEO1 or S-VIDEO1 INPUT jack
2) When using VIDEO2 or S-VIDEO2 INPUT jack
3) When using COMPONENT1
INPUT jacks
4) When using COMPONENT2
INPUT jacks
5) When using HDMI INPUT jack
. The information display will automatically dis-
appear in one minute.
EN
Publicidad
