Publicidad
Idiomas disponibles
Idiomas disponibles
[]
New Password
4 Display the "New Password" screen.
. Using [A/T],
select "New Password".
Set the method of sound input for HDMI jack.
• Press [ENTER].
5 Change the Password.
• Use Channel number
buttons on the remote
control and enter the NEW 4-digit Password.
• Enter Password again in "Confirm Password"
box.
1 Display the setup screen.
. Press [SETUP].
The following setup screen is displayed.
6 To exit the setup, press [SETUP].
NOTES:
* Make sure to enter the exact same new password
in the
"Confirm Password" space as one in the space, tf they are
different, the space is cleared for reentering.
* Yourpassword
will be erased and return to the default
(0000) when a power failure occurs or when you turn off the
power using a wall switch, tf you forget the password,
unplug the power cord for 10 seconds to restore the pass-
word to 0000.
2
Select "DETAIl" and press [ENTER] to confirm.
• Using [A/T],
select "HDMI Audio" and press
[ENTER] to confirm.
3
Switch the HDMI Audio.
. Using [A/T'], select the desired HDMI Audio,
then press [ENTER].
• Select "Auto" if you connected to both digital
device with HDMI jack and analog device for
audio sources. Digital audio input signal has
prior in this setting.
. Select "Digital" if you connected to digital
device with HDMI jack for digital audio input
signal.
. Select "Analog" if you connected to analog
device with analog jacks for analog audio input
signal.
4 To exit the setup, press [SETUP].
EN
Publicidad
