Publicidad
Idiomas disponibles
Idiomas disponibles
IISCELLANEOUS
The following is a description of the method for attaching a wall mount to this TV.
When performing this operation, refer to the instruction manual included with the wall mount kit.
You need the following
wall mount unit (commercially
available)
and 4 screws for this TV.
U2 Tilt: OmniMount
Systems, Inc. (www.omnimount.com)
Philips Screw: M4 x 16mm
,_ CAUTION
• Any damage caused by incorrectly attempting to mount this TV is not covered under the terms of the
manufacturers warranty.
Parte trasera del TV
.olii-I
1 Turn this TV over and place it screen-first onto a
table which has a soft cloth draped over it.
Place this TV in a way so that the stands hang
over the edge of the table.
NOTES:
• Make sure to use a table which can support the
weight of this TV and is larger than this T_
• Make sure the table is in a stable location.
2
Remove the stands from this TV.
Unscrew the M4 screws indicated by (1_ and
remove the stands.
Also, unscrew the M4 screws indicated by _2).
Please be careful with the TV after you remove
the stands.
NOTE:
• The screws and stands you have removed are nec-
essary for reattachment at a later date. Make sure to
keep them in a safe place.
3
Attach the left and right TV rails to this TV using
the M4 x 16mm screws included with the wall
mount kit.
f.2_ indicates the position of the screw holes on
this TV.
NOTES:
• Only use the screw holes indicated by _2"_for
mounting this T_/
• For instructions
on how to attach the TV rails, refer
to the instruction manual included with the mount
wall kit.
4 Attach this TV to the wall.
NOTE:
• Refer to the instruction manual included with the
wall mount when securing this TV to the wall.
0
LU
Z
,.J
,=J
LU
0
(5
Z
p-
p-
LU
,=J
z
0
p-
0
EN
Publicidad
