Publicidad
Idiomas disponibles
Idiomas disponibles
EN
To maintain compliance with the RF exposure requirement, a separation distance of 5 mm between the device and the
human should be maintained.
• Alarm information in France (IC)
Déclaration d'exposition Attention: Cet émetteur doit être installé pour fournir une distance de separation d'au moins 5
mm de toute personne.
Model:
051405U
FCC ID:2ALS8-KS0018
IC:22636-KS0018
Use of the Works with Apple badge means that a product has been designed to work specifically with the technology
identified in the badge and has been certified by the product manufacturer to meet Apple Find My network product
specifications and requirements. Apple is not responsible for the operation of this device or use of this product or its
compliance with safety and regulatory standards.
4
Trademark
Ninebot is the trademark of Ninebot (Beijing) Tech Co., Ltd; Segway, Powered by Segway and Rider Design are trademarks
of Segway Inc., App Store, Apple logo, Apple, Apple Find My, AppleWatch, Find My, iPhone, iPad, iPadOS, Mac, macOS and
watchOS are registered trademarks of Apple Inc. IOS is a trademark of Cisco and is used under license. Google Play and the
Google Play logo are trademarks of Google LLC. TheBluetooth® word mark and logos are registered trademarks owned by
Bluetooth SIG, Inc. and any use of such marks by manufacturer is under license. Other trademarks and trade names are
those of their respective owners.
We have attempted to include descriptions and instructions for all the functions of the KickScooter at the time of printing.
However, due to constant improvement of product features and changes of design, your KickScooter may difer slightly
from the one shown in this document. Scan the QR code or visit the Apple App Store (iOS) or the Google Play Store
(Android) to download and install the App and then read the latest version of Product Manual.
Please note that there are multiple Segway and Ninebot models with different functions, and some of the functions
mentioned herein may not be applicable to your KickScooter. The manufacturer reserves the right to change the design
and functionality of the KickScooter product and documentation without prior notice.
© 2023 Ninebot (Beijing) Tech Co. Ltd. All rights reserved.
（※The Segway-Ninebot App can support KickScooter with built-in Bluetooth)
05
5
Common Failures
Error code
Possible causes and solution
10
Dashboard communication is abnormal, please check the dashboard or related cables.
11
Phase A of motor current sampling is abnormal, please check controller.
12
Phase B of motor current sampling is abnormal, please check controller.
Phase C of motor current sampling is abnormal, please check controller.
13
Throttle hall sensor error, please check throttle handle, dashboard and related cables.
14
Brake hall sensor error, please check brake handle, dashboard and related cables.
15
18
The motor Hall sensor is abnormal, please check the controller.
Battery communication error, please check the controller.
21
The battery is the default serial number, please contact after-sales service.
23
Serial no of the scooter is wrong, please contact after-sales service.
35
Battery temperature sensor is abnormal, please make sure the temperature is between 14°F (-10°C) and
39
122°F (50°C), or contact after-sales service.
Motor not calibrated,please contact after-sales service.
42
The motor bus current amplifier circuit is abnormal. Please contact after-sales service.
45
Motor phase loss, please check controller.
50
Controller over voltage, check if the vehicle charger is used or if the vehicle is restarted.
51
The motor is stalled, please check whether it is overloaded.
52
The controller is over current, please check whether it is overloaded.
53
The controller is over current level II, please check whether it is overloaded.
54
EN
06
Publicidad
