Emos E2157 Manual De Instrucciones página 5

Wait a few seconds until the rising or falling temperature on the
LCD display stops.
The measured temperature will be displayed on the left of the screen
in the THERMO TEMP box.
Temperature Alarm
The thermometer allows the temperature alarm to be set at the
desired temperature.
Set the desired temperature of the food (-20 °C to +250 °C, resolution
1 °C) using the setting "Food Temperature Measurement Function".
The set temperature will be displayed on the right of the screen in
the SET TEMP box.
When the temperature of the food reaches the desired temperature,
the thermometer will start beeping and the bell icon will be displayed.
To stop the beeping, disconnect the probe or switch to the TIMER
function.
Do not leave the temperature probe in the food while cooking or
baking. Remove immediately after measuring.
Timer Function
On the reverse side of the thermometer set the switch to the
TIMER function.
1. Press the MIN/SEC buttons repeatedly to set the desired time.
Hold the MIN/SEC buttons to accelerate the setting. The maxi-
mum set duration is 99 minutes 59 seconds.
2. Start the timer by pressing the S/S button.
3. Once the timer ends, a sound alert is activated which lasts
for 60 seconds.
4. To stop the sound alert, press the S/S button.
How to Interrupt or Reset the Timer Before the Set Time Expires
To temporarily stop the set timer during operation, press the S/S
button and again to restart.
To reset the set timer, press both the MIN and SEC buttons at the
same time.
Last Set Value Memory
The timer has a memory function on the display indicating the last
value that was set.
Start it anytime by pressing the S/S button.
5