Publicidad
Idiomas disponibles
Idiomas disponibles
EN
How to Use
Vacuum and Mop
Note: When using the mop assembly for the first time, the robot
performs the "Vacuum and Mop" task by default.
1. Start cleaning
Press the button on the base station or on the robot, or use the
app to make the robot start from the base station. Then the robot will
plan the optimal cleaning route and perform the cleaning task based on
the created map.
Note:
·
To ensure the robot can easily return to the base station after cleaning, it
is recommended to make the robot start from the base station.
·
The mop pads will be cleaned before the robot starts mopping, please
wait patiently.
·
Do not move the base station, the clean water tank, the used water tank,
or the washboard during operation.
16
2. Auto mop washing
When cleaning, the robot will automatically return to the base station to
wash mop pads based on the mop pad cleaning frequency specified in
the app. The base station will automatically refill the robot's water tank
and the robot will resume cleanup.
Self-Clean
How to Use
3. Automatically empty the dust box and wash and dry the
mop pads after finishing the "Vacuum and Mop" task
After the robot finishes a cleaning task and returns to the base station to
charge, the base station will automatically start emptying the dust box.
Then it will wash and dry the mop pads.
Note:
·
If the auto-empty function is turned off in the app, the base station
will not automatically empty the dust box.
·
The base station will empty the dust box according to the frequency
set in the app.
4. Clean the used water tank
After the robot has completed its task, please clean the used water tank
to prevent any odor.
Vacuum then Mop
Select "Vacuum then Mop" in the app, and the robot will automatically
remove the mop assembly on the base station to vacuum the floor. After
vacuuming is completed, the robot will return to the base station to
install the mop assembly and the base station will automatically start
emptying the dust box. And then, the robot will start mopping after the
main brush is raised.
Vacuum Only
Select "Vacuum Only" in the app, and the robot will automatically
remove the mop assembly on the base station and start vacuuming.
Mop Only
Select "Mop Only" in the app, and the robot will automatically check if
the mop assembly is installed on the base station. If not, the robot will
install the mop assembly and start mopping after the main brush is
raised.
EN
17
Publicidad
