Publicidad
Idiomas disponibles
Idiomas disponibles
4. Wear safety glasses and becareful not t o
cutyourself.
5. Carefully filethe cutting e dges ofthe
blade w ithafine tooth fileM-3 or
sharpening
stone.
6. Check balance ofblade. See instructions
forblade b alancing.
7. Replace
blade o nmower and tighten
securely. Refer toinstructions
below.
BLADE B AL&NC|NG
(SEE N)
Check balance of blade by placing center
hole in blade N-1 over a nail or screwdriver
shank N-2, clamped
horizontally
in a vise N-3.
If either end of the blade rotates downward,
file that end. Blade is properly
balanced when
neither end drops.
BUU)I:
MA|NTENANCE
(SEE O & P)
Renew your metal blade after 50 hours
mowing
or 2 years, which ever is the sooner-
regardless of condition.
Follow these procedures
to remove
and
replace the blade. You will need garden gloves
(not provided)
and a spanner wrench (not
provided)
to remove the blade.
Hold the blade
(P-2) and unscrew the blade nut (P-5) counter-
clockwise
using a spanner wrench.
Remove
blade nut (P-5), square washer (P-4), insulator
washer (P-3), and blade (P-2).
To re-assemble,
first position the blade
with the cutting edges towards
the ground.
Assemble
the components.
Ensure that the edges of the insulator
washer
hook over the edge of the blade. Align the flats
on the square washer
(P-4) with the flats on the
shaft.
Then securely tighten the blade nut.
NeTE:
if the blade and insulator
washer
(P-3)
are cracked or damaged,
replace with new
ones.
QFF SEASQH STORAGE
The mower may be stored with the charger
disconnected
if all of the following
conditions
are met.
1)
The mower is fully charged before storing.
Recharge the battery twice a month to
increase the life of the battery.
2)
The average temperature
of the storage
location
is below 50°F (10°C).
3)
Storage duration
is lessthan
6 months.
STOXAGr- (SEEQ)
Stop the mower and always remove the
safety key. Clean the exterior
of the machine
thoroughly
using a soft brush and cloth. Do
not use water, solvents
or polishes.
Remove
all grass and debris, especially from the
ventilation
slots.
Turn the machine on its side and clean the
blade area. If grass cuttings
are compacted
in the blade area, remove with a wooden
or
plastic implement.
Store the machine
in a dry place. Do not place
other objects on top of the machine.
To aid storage,
press the handle height
adjustment
knob, and rotate or fold the upper
handle.
WARRAMTY STATEMEMT
30 DAY Satisfaction
Guarantee
If for any reason you are dissatisfied
with any
WORX product,
you can return the product,
along with proof of purchase, within 30 days
for a full refund.
If yourWORX
product becomes
defective
due
to faulty materials
or workmanship
within
the
specified
warranty
period of;
.24 months for DIY and light trade use, from
the date of purchase.
We guarantee
to repair or replace all defective
parts free of charge, repair products
subject
to fair wear and tear, free of charge, or at our
discretion,
replace the unit free of charge
to ensure minimum
inconvenience
to the
customer.Your
warranty
is subject to the
following
conditions:
* Proof of purchase date and a valid receipt is
produced.
*The product
has not been misused.
*The product
has not been used for
Professional
purposes.
Publicidad
