Publicidad
Idiomas disponibles
Idiomas disponibles
MAINTENANCE
7.6
BASIC ENGINE MAINTENANCE (GAS ENGINE)
•
For
detailed
engine
specifications refer to the separate gasoline engine manual.
•
All service to the engine should be performed by a dealer
authorized by the engine manufacturer.
•
Use a premium quality motor oil. 10W30 is recommended
for general all temperature use. Other viscosities may be
required in other climates.
• Use only a (NGK) BP6ES or BPR6E spark plug. Gap the
plug to 0.028 to 0.031 In. (0.7 to 0.8 mm) Always use a
spark plug wrench.
DAILY
1. Check engine oil level, and fill as necessary.
2. Check gasoline level, and fill as necessary.
Always follow the fueling procedure outlined
earlier in this manual.
FIRST 20 HOURS
•
Change engine oil.
EVERY 100 HOURS
•
Change engine oil.
•
Clean the sediment cup.
•
Clean and re-gap the spark plug.
•
Clean the spark arrestor.
WEEKLY
•
Remove the air filter cover and clean the element. In
very dusty environments, check the filter daily. Replace
the element as needed. Replacement elements can be
purchased from your local engine manufacturer dealer.
ENGINE OPERATION AND SERVICE
•
Clean and oil air filter pad on gasoline engine every 25
hours or once weekly. Do not permit the air intake screen
around the fly wheel of the gas engine to load up with paint
or trash. Clean it regularly. The service life and efficiency
of the gas engine model depends upon keeping the
gasoline engine running properly. Change the oil in the
engine every 100 hours. Failure to observe this may result
in engine overheating. Consult the engine manufacturer's
service manual provided.
24
maintenance
and
technical
•
While it is OK to run the engine at lower RPMs for multiple
hours at a time for cleaning, setup, and teardown, max
RPMs are required to keep the battery fully charged and
for best battery life.
•
The warranty on gasoline engines or electric motors is
limited to the original manufacturer.
HYDRA X
Publicidad
