Ipod/Iphone And Smartphone; Attaching Identification Labels To Usb Cables; Ipod/Iphone; Connecting Via The Usb Port - Pioneer AVH-Z9250BT Manual De Instrucciones

Middle range output (NW)
Yellow/black (MUTE)
If you use an equipment with Mute function, wire this lead to the Audio Mute lead on
that equipment. If not, keep the Audio Mute lead free of any connections.
This product
System remote control
Connect to Blue/white cable (max. 300 mA 12 V DC).
Rear speaker (STD)
Middle range speaker (NW)
Front speaker (STD)
High range speaker (NW)
Subwoofer (STD)
Low range speaker (NW)
NOTE
Select the appropriate speaker mode between standard mode (STD) and network mode
(NW). For details, refer to Starting up the unit (page 9).
56
En
iPod/iPhone and
smartphone
NOTES
• For details on how to connect an external
device using a separately sold cable, refer
to the manual for the cable.
• For details concerning the connection,
operations and compatibility of the
iPhone, refer to the chapter of each
source or application.
• For details concerning the connection
and operations of the smartphone, refer
to the chapter of each source or
application.
Attaching
identification labels to
USB cables
Attach identification labels to USB cables
(supplied and sold separately) before
installing this product in a vehicle.
1
Connect USB cables to the USB port 1
and 2 on the rear of this product.
2
Attach the identification labels
corresponding to each port to the USB
cables as illustrated below.
Attach the "Port 1 Apple CarPlay" label
to the USB cable connected to the USB
port 1.
Attach the "Port 2 Android Auto" label
to the USB cable connected to the USB
port 2.

iPod/iPhone

Connecting via the USB port

USB port1
USB cable 1.5 m
USB interface cable for iPod/iPhone (CD-
IU52) (sold separately)
iPhone