Setting The Anti-Theft Function; Restoring This Product To The Default Settings - Pioneer AVH-Z9250BT Manual De Instrucciones

[SD] The video and sound of the SD memory cards are output to the rear display.
NOTE
Compatible file types are MPEG-4, H.264, WMV, MKV, and FLV only.
[AV] The video and/or sound of the AV input source are output to the rear display.
NOTE
The video image and sound are output only when [AV Input] is set to [Source]
(page 37).
[Source OFF] Nothing is output to the rear display.

Setting the anti-theft function

You can set a password for this product. If the back-up lead is cut after the password is
set, this product prompts for the password at the time of next boot up.
Important
If you forgot your password, contact the nearest authorised Pioneer Service Station.
Setting the password
1
Press .
2
Touch then .
3
Touch 1, followed by 2, and then touch 3.
4
Touch [Set Password].
5
Enter the password.
5 to 16 characters can be entered for a password.
6
Touch [Go].
7
Enter a password hint.
52
En
Up to 40 characters can be entered for a hint.
8
Touch [Go].
If you want to change the password currently set, enter the current password and
then enter the new one.
9
Check the password, and then touch [OK].
Deleting the password
The current password and password hint can be deleted.
1
Press .
2
Touch then .
3
Touch 1, followed by 2, and then touch 3 (page 52).
4
Touch [Clear Password].
5
Touch [Yes].
6
Touch [OK].
7
Enter the current password.
8
Touch [Go].
A message indicating that the security setting is cancelled appears.

Restoring this product to the default settings

You can restore settings or recorded content to the default settings from [Restore
Settings] in the [System] menu (page 41).