Unplugging a USB storage device
1
Pull out the USB storage device from the USB cable.
NOTES
• Check that no data is being accessed before pulling out the USB storage device.
• Turn off (ACC OFF) the ignition switch before unplugging the USB storage device.
Starting procedure
For Disc
1
Insert the disc (page 25).
TIP
If the disc is already set, select [Disc] as the playing source.
For USB/SD
1
Insert the SD memory card into the SD card slot or plug the USB storage device
into the USB connector.
2
Press
then touch
.
3
Touch [USB] or [SD].
Playback is performed in order of folder numbers. Folders are skipped if they contain
no playable files.
NOTES
• For details on inserting SD card see on Inserting an SD memory card (page 25).
• For details on plugging USB storage device, see on Plugging a USB storage device (page 25).
Basic operation
TIPS
• By pressing
then touch
or
• By pressing
then touch and hold
reverse or fast forwards.
• You can set the screen size for the video and image files (page 51).
26
En
, you can also skip files/chapters forwards or backwards.
or
on the audio or video file, you can also perform fast
Audio source
Audio source screen 1 (Example: USB)
Displays the link search screen.
Touch the song to play back followed by touching the song information, after
switching to Music Browse mode (page 27).
TIP
If you touch the artwork, the list of songs in the album is displayed.
NOTE
This function is available for the external storage device (USB, SD) only.
Switches between playback and pause.
Switches the following media file types.
[Music]: Compressed audio files
[Video]: Compressed video files
[Photo]: Image files
Skips files forwards or backwards.
Switches the current music information display.
Selects a file from the list.
Touch a file on the list to playback.
TIP
Touching a folder on the list shows its contents. You can play a file on the list by
touching it.
NOTE
When you play compressed audio files stored in an external storage device (USB,
SD), you can search for a file using Music Browse (page 27).