TRAPP Master 2001 Manual De Instrucciones página 15

www.trapp.com.br
5. Adjust the handle to the ideal position for
operation. The adjustment of the cutting
blade is made by turning wing nuts clockwise
so that they stay close to the rotary cutters.
6. To adjust cutting height, pull the adjustment
handle out of the side so that pins can be
removed one by one to the holes chosen on
the side. This adjustment is made according
to the height and amount of grass.
Lubrication:
Frequently lubricate lawn mower with SAE 30 or 40 oil.
Remove the cap from the wheel, the safety pin, the wheel and the ratchet gear. Pour some oil on the
rotar axle and allow it to flow to the roller bearing. Do neither turn the ratchet pawl nor change the
bearings from one side to the other. Reassemble.
7. Frequently lubricate lawn mower with SAE 30
or 40 oil. Remove the cap from the wheel,
the safety pin, the wheel and the ratchet gear.
Pour some oil on the rotor axle and allow it to
flow to the roller bearing. When assembling,
do neither turn the ratchet pawl nor change
the bearings from one side to the other.
8. To assure better performance and durability,
store it in a dry place, protected from the
weather, and clean it after use.
Maintenance
15