cecotec CONGA HAND CARPET&SPOT CLEAN 1500 Manual De Instrucciones página 53

1. PARTS AND COMPONENTS
Fig. 1
1. Main body
2. Power button
3. Water spray button
4. Water tank
5. Suction cover
6. Charger
Fig. 2.
1. Waste-water tank
2. Clean-water tank
NOTE:
the graphics in this manual are schematic representations and may not exactly match the
device.
2. BEFORE USE
- This appliance is packaged in a way as to protect it during transport. Take the device out
of its box and remove all packaging materials. You can keep the original box and other
packaging elements in a safe place. This will help you prevent damage to the device when
transporting it in the future. In case the original packaging is disposed of, make sure all
packaging materials are recycled accordingly.
Make sure all parts and components are included and in good conditions. If there is any
-
piece missing or in bad conditions, contact the official Cecotec Technical Support Service
immediately.
Box content
- Upholstery vacuum cleaner
Charger
-
- Instruction manual
3. OPERATION
1. If you wish to clean with water, with the vacuum cleaner switched off, remove the water
tank by pressing the tab and fill the tank with clean water. Fig. 3.
2. Press the power button. The blue indicator light will light up and the vacuum cleaner will
start.
3. Once the vacuum cleaner is switched on, press, and hold the water spray button to spray
CONGA HAND CARPET&SPOT CLEAN 1500
ENGLISH
53