cecotec POWER ESPRESSO 20 STEEL PRO Manual De Instrucciones página 53

Too much ground coffee.
Coffee takes
a long time
to brew or
comes out
If the ground coffee is too fine.
in small
quantities
The water heater has no water.
Single or
double
coffee filter The edge of the filter is too
is clogged tight.
in the coffee
machine
You are preparing coffee using
the low-temperature mode.
If you press the manual control
button to prepare coffee before
the preheating process is
finished.
Coffee is too
cold
If you press the manual control
button to prepare coffee before
the preheating process is
finished.
Drain the water from the heater
before preheating.
The ground coffee should not be
too coarse or too fine, it should be
of standard quality and quantity (1
tablespoon of coffee for one cup and 2
tablespoons of coffee for two cups).
Please use coffee powder specifically for
espresso machines, the coffee should
not be too fine.
Before preheating, press the single cup /
hand control button, let about 180 ml of
water flow out of the steamer.
Insert the funnel into the brewer and
turn it left and right until the filter comes
out or use the funnel to push the filter
down. Check if the edge of the filter
is coming out each time the funnel is
inserted.
Prepare coffee using the high
temperature mode.
Press the manual control button after
the preheating process is completed.
Use the double brew function (do not put
ground coffee in the metal filter) or wait
for the preheating to finish in the coffee
mode before brewing coffee.
Before the preheating process, press the
single cup / manual control button and
let about 180 ml of water flow out of the
steamer.
POWER ESPRESSO 20 STEEL PRO
ENGLISH
53