Descargar Imprimir esta página

cecotec POWER ESPRESSO 20 STEEL PRO Manual De Instrucciones página 8

Ocultar thumbs Ver también para POWER ESPRESSO 20 STEEL PRO:

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 32
- Ensure that the mains voltage matches the voltage
specified on the appliance rating label and that the plug is
earthed.
- Do not immerse the cable, plug, or any other
non-removable part of the device in water or any other
liquid or expose electrical connections to water. Make sure
your hands are dry before handling the plug or switching
on the device.
- Warning: if the device falls accidentally in water, unplug it
immediately. Do not touch the water!
- Check the power cable regularly for visible damage. If
the cable is damaged, it must be replaced by the official
Technical Support Service of Cecotec
- in order to avoid any type of danger.
- WARNING: Do not use the appliance if its cable, plug, or
housing are damaged, nor after it malfunctions or has been
dropped or damaged in any way.
- Do not twist, bend, pull, or damage the power cable. Protect
it from sharp edges and heat sources. Do not allow the
cable to touch hot surfaces. Do not let the cable hang over
the edge of the working surface or worktop.
- This appliance is not intended to be operated by means of
an external timer or separate remote-control system.
- Turn off and unplug the appliance from the mains supply
when not in use and before cleaning it. Pull from the plug,
not the cable, to disconnect it from the outlet.
- Supervise children to prevent them from playing with
the appliance. Close supervision is necessary when the
appliance is being used by or near children.
- Place the appliance on a dry, stable, flat, heat-resistant
surface.
8

Publicidad

loading

Este manual también es adecuado para:

01984