Angle Attachment Dd-As [5]; Eccentric Attachment Dd-Es [6]; Tool Holder In The Drill Spindle [7]; Working With The Power Tool - Festool C 18 Li Manual De Instrucciones

Angle attachment DD-AS [5]

Drilling and screwing at right angle to machine
(partly as an accessory).
5
DD-AS
+ BF-FX
+ WH-CE

Eccentric attachment DD-ES [6]

Screwdriving near edges with bits according to ISO
1173 (partly as accessory).
6
DD-ES
Consider the pictures on the fold-out page.
WARNING
Risk of injury

Always secure the workpiece in such a manner
that it cannot move while being machined.
1
2
3
1
2
3

Working with the power tool

Tool holder in the drill spindle [7]

Bits can be inserted directly into the hexagon sock-
et holder of the drill spindle.
7

On/Off switch [1-9]

Press = ON, release = OFF
 The speed of the machine depends on how far
the on/off switch is pressed in.
The LED bulb [1-3] lights up when the ON/OFF
switch is pressed [1-9].
13