Sonel CMP-200 Manual De Uso página 26

In order to replace the battery it is necessary to do the following:

place rotational selector in the position OFF and remove the
one rear Phillips head screw,

open the battery compartment and replace the required two
1.5 V AAA batteries,

re-assemble the tester.
7
The casing of the tester may be cleaned with a soft, damp cloth
using all-purpose detergents. Do not use any solvents or cleaning
agents which might scratch the casing (powders, pastes, etc.).
The electronic system of the tester does not require maintenance.
In the case of storage of the device, the following recommenda-
tions must be observed:

Make sure the tester and its accessories are dry,

In the case the tester is to be stored for a prolonged period of
time, the battery must be removed from the device.
9
Worn-out electric and electronic equipment should be gathered
selectively, i.e. it must not be placed with waste of another kind.
Worn-out electronic equipment should be sent to a collection
point in accordance with the law of worn-out electric and electronic
equipment.
Before the equipment is sent to a collection point, do not dis-
mantle any elements.
Observe the local regulations concerning disposal of packages,
worn-out batteries and accumulators.
24
Cleaning and maintenance
8
Dismantling and utilization
CMP-200 – USER MANUAL
Storage