7. Before connecting, make sure that the plate data
corresponds with the mains electrical supply.
The data plate is located on the appliance.
8.
Install it according to the manufacturer's instructions
An incorrect installation can cause damage to people,
animals or property for which the manufacturer accepts
no responsibility.
9.
Always and only use it in a vertical position.
Place the appliance in an appropriate environment and on a
stable and plane surface.
10. Always unreel the cable completely during use.
11. The appliance is equipped with a power cord with plug
(Y-type connection). If the power cord is damaged, it must
be replaced by the manufacturer, his technical service
or a similarly qualified person in order to eliminate all
possible risks.
12. Install it in such a way that the switches and other controls
cannot be reached by persons using the bath or shower.
13. Do not use extensions, if not with particular care.
14a. If the appliance installed on the floor is used (with the
feet), make sure to keep a distance of at least 1m from
other objects (fig. 1).
14b. If the appliance installed on the wall is used (with the
bracket), make sure to keep a distance of at least 1m from
the roof and of at least 15cm from the floor (fig. 1).
14c. DO NOT install the appliance on wooden walls
14d. To avoid the risk of fire, keep the air outlets of the appli-
ance at a distance of at least 1m from any object, curtains,
fabric or flammable materials (fig. 2).
15. Do not place appliance close to a radiant heat source.
16. Do not use the appliance to dry clothes.
17. Do not insert or allow foreign objects to enter any
ventilation or exhaust opening, as this may cause an
electric shock, fire or damage to the appliance.
18. Do not allow cord to come in contact with heated surfaces
during operation.
19. Do not run cord under carpeting, throw rugs or runners
etc. Arrange cord away from traffic areas so that it will not
be tripped over.
20. Do not twist, kink or wrap the cord around the appliance,
as this may cause the insulation to weaken and split.
EN - 4