• Remove the batteries in case of prolonged disuse of the remote control.
3.2.a - Insertion of batteries
The batteries are supplied with the ma-
chine.
To insert the batteries correctly:
a. Remove the batteries compartment
cover (9a).
b. Insert the batteries into the relevant
compartment.
Check the polarity indicated on the
bottom of the compartment.
c. Close the compartment correctly.
3.2.b - Replacement of batteries
Replace the batteries when you no longer
hear a beep from the appliance when
pressing any key on the remote control.
Always use new batteries. The use of
old or different batteries could generate
malfunctioning of the remote control.
The remote controller uses a 3,0V lithium battery (type CR 2025).
When replacing batteries, replace both and dispose of the dead
batteries in the appropriate collection centres and as required by
law.
• If the remote control is not used for several weeks or longer, remove the
batteries.
Any leaks from the batteries could damage the remote control.
Do not re-charge or disassemble the batteries. Do not throw the
batteries into the fire. They can burn and explode.
EN - 12
9
9a
2
1
9a
9