Progress Lighting P250108 Manual De Instalación página 10

White (Neutral)
Black (Hot)
Outlet Box
White ("AC IN N")
Black ("AC IN L")
Receiver
White
Blue
Yellow
Red
Grey
Grey
Red
Yellow
Blue
White
Canopy
Figure 12
7.
Finishing the Installation
Ground conductor
MAKE SURE THE TAB ON THE HANGING
Green
BRACKET PROPERLY SITS IN THE GROOVE
IN THE HANGER BALL BEFORE ATTACHING
THE CANOPY TO THE BRACKET BY
TURNING THE HOUSING UNTIL IT DROPS
Green
Step 1. Tuck connections neatly into ceiling outlet
box.
Green
Step 2. Slide the canopy up to mounting bracket
Green
and place the key hole on the canopy over the
screw on the mounting bracket, turn canopy until it
locks in place at the narrow section of the key
holes. (Fig. 13)
Step 3. Align the circular hole on canopy with the
remaining hole on the mounting bracket, secure by
tightening the two set screws. NOTE: Adjust the
canopy screws as necessary until the canopy and
canopy cover are snug.
WARNING
INTO PLACE.
Outlet box
Hanger
bracket
Figure 13
Screws
Canopy
Canopy cover