Publicidad
Idiomas disponibles
Idiomas disponibles
Installing the Remote
Control Holder
Step 1. Remove the remote control holder cover
from the remote control holder.
Step 2. Attach the remote control holder with the
two remote control holder mounting screw provided.
(Fig. 22)
Step 3. Replace the remote control holder cover
into remote control holder.
Screws
Figure 22
Here are some suggestions to help
you maintain your fan
1. Because of the fan's natural movement, some
connections may become loose. Check the support
connections, brackets, and blade attachments
twice a year. Make sure they are secure. (It is not
necessary to remove fan from ceiling.)
2. Clean your fan periodically to help maintain
its new appearance over the years. Use only a soft
brush or lint-free cloth to avoid scratching the finish.
The plating is sealed with a lacquer to minimize
discoloration or tarnishing. Do not use water when
cleaning. This could damage the motor or possibly
cause an electrical shock.
Remote Control
Holder Cover
3. There is no need to oil your fan. The motor
has permanently lubricated bearings.
Remote
Control
Holder
MAKE SURE THE POWER IS OFF AT THE
ELECTRICAL PANEL BOX BEFORE YOU
ATTEMPT ANY REPAIRS. REFER TO THE
SECTION "MAKING ELECTRICAL
Care of Your Fan 12.
IMPORTANT
CONNECTIONS"
Publicidad
