VM Motori R753IE5 Manual Instrucciones Para El Uso página 76

Nominal voltage
Alternating current generator
(nominal voltage)
Alternating current generator
(nominal current)
Starter motor output
Recommended battery capacity
Recommended battery inrush
current
Type of injection
Type of fuel
Total capacity of engine internal
cooling circuit
Total capacity of engine cooling
circuit installed on the vehicle
Coolant
English
Electric system
V
V
A
kW
Ah
CCA
Fuel supply circuit
Common Rail direct injection with high pressure injection pump
The engine has been designed to be powered by standard fuels
according to specifications UNI EN 590.
(maximum bio-diesel content 7%)
The use of fuels with specifications other than those
indicated is forbidden.
Cooling circuit
It varies according to the configuration of the cooling
litres
circuit of the vehicle where the engine is installed
Respect the instructions of the manufacturer of the
-
vehicle in which the engine is installed
Organic Acid Technology (OAT coolant)
The coolant based on ethylene glycol and
demineralized water, also known as "antifreeze", is
used to protect the coolant from freezing.
It also contains chemical additives that protect against
It is required that the coolant conforms to
ASTM D 3306 Type 3 standards.
-
The use of the following refrigerant fluids is
recommended: Petronas Paraflu UP Ready (ASTM D
Fuchs Maintain Fricofin LL50 (ASTM D 3306 Type 3).
NOTE: Only ready-to-use refrigerant fluids are
permitted. Concentrated fluids to be mixed with water
13
12
14
90
2,5
100
950 A EN
IMPORTANT
corrosion.
3306 Type 3)
or
are not permitted.
R753IE5
GB
42432107F