VM Motori R753IE5 Manual Instrucciones Para El Uso página 80

INFORMATION ON THE ENVIRONMENTAL IMPACT
The procedures to be followed to identify
any significant environmental impact
should take into account the following
factors:
- Emissions in the atmosphere
- Discharged liquids
- Waste management
- Soil contamination
- Use of raw materials and natural
resources
- Local problems related to the
environmental impact
In order to minimise the environmental
impact, the engine manufacturer provides
below some indications to be taken into
account by all those that interact with the
engine for any purpose.
- All packaging components must be
disposed of in accordance with the
legislation in force in the country where
disposal takes place.
- When installing and using the engine,
ensure a suitable air renewal in the room
where the engine is used, to protect the
operators from a high concentration of
unhealthy air and allow the correct engine
operation.
- Do not dump polluting products (oils,
fluids, etc.) in the environment and carry
out separate waste disposal according to
the composition of the different materials
and in compliance with the legislation in
force.
- Keep the exhaust pipelines efficient to
limit the noise level of the engine and
reduce atmospheric pollution.
- While decommissioning the engine,
separate all the components depending on
their chemical composition and dispose of
them accordingly.
English
The responsibility for interventions of
any kind not authorised in writing by
VM MOTORI STELLANTIS EUROPE lies
on the person who performs it which
becomes de facto the manufacturer.
- VM MOTORI STELLANTIS EUROPE
declares that the engine has the
characteristics to fall within the
parameters allowed by current
regulations on the emission of:
- airborne noise
- polluting exhaust gases.
17
R753IE5
GB
42432107F