Publicidad
Idiomas disponibles
Idiomas disponibles
ENGINE OIL REPLACEMENT
CAUTION - PRECAUTION
The engine oil to be replaced must be
drained when still hot or lukewarm to
allow the flow of suspended debris
particles.
With completely cold engine oil, debris
tends to settle in the bottom of the oil
sump, then returning to circulation when
the engine is started.
Avoid contact with hot engine parts and
hot oil.
Wear gloves and suitable protective
clothing.
Follow the procedure below :
IMPORTANT
Carry out the operation with the engine
off. Ignition key removed, wait at least
6 minutes before disconnecting the
negative battery cable.
1 - Place a container with suitable capacity
under the point where the old oil is
drained.
IMPORTANT
The oil pan is equipped with two engine
oil drain plugs. To drain the oil, un-
screw the drain plug with better acces-
sibility depending on how the engine is
installed on the vehicle.
Do not manipulate in any way the plug
not selected for oil drainage.
2 - Unscrew the filler plug (M).
3 - Unscrew the drain plug (Q) and remove
the gasket (R).
Let all the oil flow into the container.
English
M
R
Q
55
R754EU6EH
GB
42432099F
Publicidad
