VM Motori R754EU6EH Manual Instrucciones Para El Uso página 85

Type of lubrification
Hot engine oil pressure (1)*
Oil cooling
Oil change
English
Lubrification circuit
- forced lubrification with rotor pump
The engine oil must have the following characteristics:
- Viscosity grade SAE 10W-40
- Oil quality standard: ACEA E6 + E9 or E8 + E11, API
- TBN (Total Base Number) ≥ 10mgKOH/g.
- Lubricants recommended for ambient temperatures
from -20°C (-4°F) to +50°C (+122°F):
-
Petronas Urania 5000 LS 10W-40
In case of lower ambient temperatures (down to -30°C)
it's allowed to use an engine oil with the above specifica-
Do not mix oils with different characteristics
bar
bar
-
engine oil sump without balance shaft 300 hours / 8.7 Kg
engine oil sump with balance shaft 300 hours / 7.4 Kg
(kg)
engine oil sump without balance shaft 500 hours /11,5 kg
engine oil sump with balance shaft 500 hours /10,7 kg
15
- Full or semi-synthetic.
CJ4 / CK4.
or:
Motorex Focus QTM 10W-40
tions and the following grade:
SAE 5W-40 or SAE 5W-30.
1.5 at minimum engine speed
4.3 - 6.0 at 2000 engine rpm
Oil/water cooler
R754EU6EH
GB
42432099F