Publicidad
Idiomas disponibles
Idiomas disponibles
OPERATION
Before Use
Caring for Wood Features
The ash wood used in this appliance has been designated as First and Second (FAS) grade lumber by the
National Hardwood Lumber Association (NHLA).
NOTE
• Keep the indoor humidity at 40 to 60% in the winter. In the winter, the dry indoor environment can cause
the wood to crack and gap.
• The surface of this appliance requires special care to maintain its appearance. Avoid scraping, impacts,
or repeated rubbing of the surface.
• The surface finishing and the grain may differ slightly on some models.
• Protect the wood surface from prolonged direct contact with wet or damp surfaces such as cold
beverage containers, towels or cloths.
• The wood has been treated to make it moisture and pest resistant. This treatment may result in a "burnt"
odor which is normal and will fade over time.
Checklist
Clean the refrigerator.
Clean the refrigerator thoroughly and wipe off all dust that accumulated during
shipping.
• Clean the aluminum surfaces on the appliance with a soft, damp cloth. If a mild
detergent is used to remove stubborn dirt, rinse surfaces and wipe dry to avoid
stains.
• Clean wood surfaces with a soft, dry cloth. If it is necessary to use a damp cloth,
wipe surfaces dry after cleaning.
• Protect the wood surface from prolonged direct contact with wet or damp
surfaces such as cold beverage containers, towels or cloths.
• Remove adhesive residue by wiping it off with your thumb or a mild dish
detergent. Do not use sharp objects, abrasive detergents, alcohol or flammable
liquids to remove tape or adhesive.
• Do not peel off the model or serial number label or the technical information on
the rear surface of the refrigerator.
Connect the power supply.
Check if the power supply is connected before use.
CAUTION
OPERATION
11
Publicidad
