Publicidad
Idiomas disponibles
Idiomas disponibles
12 OPERATION
Wait for the refrigerator to cool.
Allow the refrigerator to run for at least three to five hours before putting food in it.
Check the flow of cold air to ensure proper cooling.
• Putting food in the refrigerator before it has cooled could cause the food to
spoil, or a bad odor to remain inside the refrigerator.
The refrigerator makes a loud noise after initial operation.
This is normal. The volume will decrease as the temperature decreases.
Control Panel
Depending on the model, some of the following functions may not be available.
The actual control panel may differ from model to model.
Control Panel Features
Wi-Fi
a
The Wi-Fi button, when used with the LG ThinQ app, allows the refrigerator to connect to a home
Wi-Fi network. Refer to Smart Functions for information on the initial setup of the application.
The Wi-Fi f icon shows the status of the refrigerator's network connection. The icon illuminates
when the refrigerator is connected to the Wi-Fi network.
Press and hold the Wi-Fi button for 3 seconds to connect to the network. The icon blinks while the
connection is being made, then turns on once the connection is successfully made.
Refrigerator
b
Indicates the set temperature of the refrigerator compartment in Celsius (°C) or Fahrenheit (°F). The
default refrigerator temperature is 41 °F (5 °C). Press the Refrigerator button repeatedly to select a
new set temperature from 37 °F to 65 °F (3 °C to 8 °C).
NOTE
• The displayed temperature is the target temperature, and not the actual temperature of the refrigerator.
The actual refrigerator temperature depends on the food inside the refrigerator.
• Set the temperature to 37°F (3°C) if storing milk, juice, or other perishables in the refrigerator.
CAUTION
Publicidad
