Descargar Imprimir esta página

Vetus E-DRIVE MPE1MBV Manual De Instalación página 8

Panel de monitoreo
Ocultar thumbs Ver también para E-DRIVE MPE1MBV:

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 17
ENGLISH
1
Safety
Warning indications
Where applicable, the following warning indications are used in this
manual in connection with safety:
Indicates that great potential danger exists that can lead to serious
injury or death.
Indicates that a potential danger that can lead to injury exists.
Indicates that the usage procedures, actions etc. concerned can re-
sult in serious damage to or destruction of the engine. Some CAU-
TION indications also advise that a potential danger exists that can
lead to serious injury or death.
Emphasises important procedures, circumstances etc.
Symbols
Indicates that the relevant procedure must be carried out.
Indicates that a particular action is forbidden.
Pass on the safety instructions to others using the E-LINE motor.
General rules and laws concerning safety and accident prevention
must always be observed.
This product should only be installed and maintained by
qualified personnel who have read and understood the in-
structions and precautions in this manual. Failure to follow
the instructions in this manual may result in serious injury or
property damage. The manufacturer shall not be liable for any
damages resulting from improper installation or maintenance
by unqualified personnel.
8
370602.11
D
anGer
W
arninG
c
aution
n
ote
W
arninG
2
Introduction
This manual gives guidelines for installing a VETUS
MPE1MBV key switch
For operation, refer to the user manual.
The quality of the installation is decisive for the reliability of the ELINE
system. Almost all faults can be traced back to errors or inaccuracies
during installation. It is therefore imperative that the steps
given in the installation instructions are followed in full during the
installation process and checked afterward.
Unauthorised modifications shall exclude the liability of the manu-
facturer for any resulting damage.
• During use ensure the correct battery voltage is available.
Changing over the plus (+) and minus (-) connections will
cause irreparable damage to the installation.
Never work on the electrical system while it is energized.
Installation manual MPE1MBV E-DRIVE Monitoring Panel
E-DRIVE
W
arninG
W
arninG

Publicidad

loading