Publicidad
Idiomas disponibles
Idiomas disponibles
r
WARNING: TO REDUCE RISK OF PERSONAL INJURY
-
UNPLUG CLEANER BEFORE SERVICING
Problem
I
Possible Reasons
Cleaner won't run
1.
See Filter Removal
-
Pg.6.
2.
See Dirt Cup removal
-
Pg.6.
3. Remove obstructions.
Possible Solutions
Cleaner doesn't vacuum
effectively
-
-
-
Dust blows out air vents
1.
Filter is dislodged.
1.
Unplugged at wall outlet.
2.
Tripped circuit breaker1 Blown fuse.
3. Improper household current.
1.
Filter clogged, wet and/or dirty.
'
2.
Dirt Cup clogged.
3. Tools clogged.
1. See Filter Removal
-
Pg.6.
1.
Plug in firmly; turn power switch
"ON".
2.
Reset circuit breaker or replace fuse.
3.
Have qualified electrician verify household current.
ANY OTHER SERVICING SHOULD BE DONE BY AN AUTHORIZED SERVICE REPRESENTATIVE
CUSTOMER SERVICE
(1
-800-321-1134)
In the event that further assistance is required, see your Yellow Pages for an authorized Royal Dealer. Costs of any transportation to
and from any place of repair are to be paid by the owner. The service parts used in this unit are easily replaced and readily available
from an authorized Royal Dealer or retailer. Always identify your cleaner by the model number when requesting information or
ordering replacement parts. (The model number appears on the bottom of the cleaner.)
Publicidad
